How to Build with Tiger Wire for Your Vape: A Comprehensive Guide
Introduction
Tiger wire has become a popular choice among vaping enthusiasts for its unique combination of flavor production and vapor density. This wire type, typically made up of a core of two wires wrapped in a thinner wire, allows for intricate builds that can elevate your vaping experience. In this article, we will explore how to build your own coils using tiger wire, ensuring you achieve the best possible performance from your device.
Understanding Tiger Wire
Tiger wire is generally composed of two thicker wires (often Kanthal, stainless steel, or nichrome) that are twisted together and then wrapped with a thin wire, usually around 26 or 28 gauge. This construction provides a larger surface area, which promotes better heat distribution and enhances flavor. The resistance of the tiger wire can vary based on the materials used, which affects how it should be built and used.
Materials Needed
Before you start building with tiger wire, gather the necessary materials:
- Tiger wire (pre-made or DIY)
- A quality RDA or RTA
- Wire cutters
- Coil jig or drill bit
- Ohm reader
- Cotton wicks
- Safety gear (gloves, goggles)
Step-by-Step Guide to Building with Tiger Wire
- Prepare Your Workspace: Ensure you are in a well-ventilated area, and have all your tools within reach. Safety should be your top priority, so wear gloves and goggles to protect yourself from any accidental wire snaps.
- Cutting the Wire: If you are using pre-made tiger wire, skip this step. For DIY, cut two lengths of your thicker wire and one length of the thinner wire, ensuring they are about 10-12 cm long each.
- Twisting the Wire: Using a drill or a coil jig, twist the two thicker wires together. After achieving the desired thickness, wrap the thinner wire around the twisted pair. Aim for about 4-6 wraps.
- Coil Placement: Insert the completed coil into the posts of your RDA or RTA. Make sure it is centered and not touching the deck. Secure the coil with screws.
- Wicking: Cut a length of cotton and thread it through the coil. Ensure it is snug but not overly tight to allow for optimal juice absorption.
- Testing Resistance: Before firing your coil, use an ohm reader to check the resistance. It is essential to ensure the resistance is within the safe range for your device.
- Juicing Up: Apply your favorite e-liquid to the wick and let it soak before taking your first puff. This is crucial to prevent dry hits.
Conclusion
Building coils with tiger wire can significantly enhance your vaping experience, offering rich flavors and dense vapor. While it requires some practice and precision, the satisfaction of mastering your coil builds is worth the effort. Always remember to prioritize safety and enjoy experimenting with different configurations to find the setup that works best for you!
Add comment