How to Change Cotton in a Dual-Coil Vape: A Step-by-Step Guide

Vaping enthusiasts often prioritize flavor and performance, both of which can be influenced by the quality of the cotton used in their coils. When using a dual-coil setup, replacing the cotton efficiently is crucial for maintaining optimal vapor production and taste. In this guide, we will walk you through the process of changing the cotton in a dual-coil vape with two coils.

Understanding the Importance of Cotton

Cotton serves as the wick in your coils, soaking up e-liquid and delivering it to the heating elements. Over time, cotton can become saturated with residues or burnt, which can negatively affect your vaping experience. Regularly changing your cotton not only improves flavor but also prolongs the life of your coils.

What You’ll Need

Before you begin, ensure you have the following tools and supplies:

• Scissors
• Pure, organic cotton
• A pair of tweezers
• Wire cutters (if necessary)
• Your dual-coil RDA or RTA
• e-liquid

Step-by-Step Guide to Changing Cotton

Step 1: Disassemble Your Device

Begin by removing your tank or RDA from your mod. If your setup is an RTA, make sure to empty any remaining e-liquid. Unscrew the top cap and carefully take out the coil assembly.

Step 2: Remove the Old Cotton

Using your tweezers, gently pull out the old cotton from both coils. Be cautious not to damage the coils themselves. If the cotton is stuck or burnt, you may need to use scissors to cut it out more easily.

Step 3: Measure and Cut New Cotton

Take your organic cotton and cut two strips, each long enough to reach from the top of the coil to the bottom of the juice well. It’s essential to ensure that the cotton is snug but not overly tight, allowing for proper liquid flow.

Step 4: Insert the New Cotton

Insert each strip of cotton into the corresponding coil. Gently pull the cotton through to ensure it fits well. The ends of the cotton should rest in the juice well, allowing them to soak in e-liquid when you refill.

Step 5: Trim and Position the Cotton

Trim the excess cotton if necessary, ensuring it doesn’t obstruct airflow. You want enough cotton for absorption without compromising performance. Position the cotton so it sits securely in the juice well.

Step 6: Prime the Coils

Before reassembling your device, use your favorite e-liquid to saturate the cotton. A few drops on the cotton will help avoid dry hits when you start vaping again.

Step 7: Reassemble and Test

Reassemble your RDA or RTA, carefully screwing on the top cap. Attach it back to your mod and take a few test puffs at a low wattage to ensure that the cotton is fully saturated and there are no dry spots.

Conclusion

Changing cotton in a dual-coil vape may seem daunting, but with a little practice, it becomes an easy task that can significantly enhance your vaping experience. Regular maintenance, including cotton changes, is essential for achieving the best flavor and performance from your device. Enjoy your freshly wicked coils and happy vaping!